£460.00

The waterco centrifugal pre filter is the newest, most efficient mechanical pre filter on the market and its great value too.

SPASA's panel of independent judges awarded Waterco's MultiCyclone centrifugal filter for its water saving features and its innovative method of filtering sediment without any filter media or moving parts.

The MultiCyclone works on the basis of centrifugal water filtration and has no filter components to clean or replace. The device spins sediments down to the sump while the cleansed water spirals upwards.

MultiCyclone captures 80 percent of the sediment that would normally clog the filter and drains it out, leading to a decrease in backwash frequency. It only requires 15 litres of water to flush it, saving pool owners time and money, as well as extending the life of the filter. In short, the pool water ends up cleaner with less upkeep.

The product is easy to install in both existing and new pools.

find out more

All units come mounted on a skid base and are supplied with high pressure blower for back flushing, non-return valve to blower and sight glass for checking on backflush progress.

1. Water is pumped to the Multi-port valve and diverted to the lower filter

(Coarse pre-filtration may be required)

2. The inflowing water is then evenly dispersed through the special slotted pipes (Laterals) within

the lower section of the filter.

3. As the water flows upwards through the filter media, the contaminated water is subjected to

mechanical and biological filtration.

1. Mechanical filters physically remove solids from the pond

by trapping them between the crevices of the filter media.

2. Biological filtration is the most effective method of

removing toxins (ammonia) and breaking it down into

nitrites and subsequently nitrates which provide food to

your aquatic plants (referred to as the Nitrogen Cycle).

This is accomplished by using naturally occurring bacteria

and giving it a place to live (Biofilter media).

find out more

£370.00

The Roto Innovation Shower Filter has a small foot print which makes it an ideal choice where installation space is of a premium.

The biological media chamber holds up to 100 litres of Crystal Bio which means there is no loss of filtration performance.

This is compared when choosing a smaller filter with less media just because the filter needs to fit a small space.
The Roto Innovation Shower Filter uses Crystal Bio which is an extremely lightweight biological media ideal for shower or trickle filters.

Crystal Bio has up to 10 times the surface area of most plastic media due to the hyper-interconnecting cell structure.
The Crystal Bio Shower Filter including 100 litres of Crystal Bio media is suitable as main filtration for Koi and Garden Ponds and quarantine tanks.



The Shower Filter is also an ideal add on filter to existing filtration systems on Koi and Garden Ponds.

Pond Type Main Filtration Extra Filtration Pond Size (ideal size of pond for a single filter unit) Max FilterFlow Rate Daily Feed Guide (grams)
Koi Yes - 13,500 Litres 3000 Gallons 9000 Litres2000 Gallons 300-400 grams of a high quality diet
Koi - Yes Unlimited pond size will suits all ponds as an add on Filter 9000 Litres2000 Gallons 300-400 grams of a high quality diet
Goldfish Yes - 27,000 Litres 6000 Gallons 9000 Litres2000 Gallons 300-400 grams of a high quality diet
Goldfish - Yes Unlimited pond size will suits all ponds as an add on Filter 9000 Litres2000 Gallons 300-400 grams of a high quality diet

find out more

£210.00

A Protein Skimmer is a device for removing the protein or dissolved organic carbon waste (DOC) from your pond water giving your fish a cleaner healthier environment to live in.
Also allowing your filters to operate 100% capacity.
Protein, or dissolved organic carbon waste (DOC) is the substance in the water which gives an oily water surface.

It is recommended that pumps with a pumping capacity of between 3,000 and 4,500 Gallons should be used and that will have enough head pressure to power a Venturi.

If you use a larger pump then there is the danger that the unit will overflow as the return water can only take the maximum flow it is capable of coping with - you could of course if you are going to use a more powerful pump, valve it down prior to the water entering the protein skimmer.



find out more

Perfect pumps are manufactured in Germany to the highest quality and standards. Representing excellent value for money the pumps are robust and extremely reliable. Specially designed for use in ponds and filters, the pumps can also be used for dry installation on gravity fed systems and swimming ponds.

Silent running, low wattage

Thermal overload protection

High quality ceramic bearings and shaft

Quick and easy cleaning
Pump motor designed for continuous operation.

Ceramic bearings and shaft without seals give longevity.

High hydraulic efficiency means the pumps give optimal outputs.

Capable of large delivery volumes with low power consumption.

Asynchronous motor gives quiet smooth running.

Pump can be used with variable speed controllers for step-less flow regulation (accessory)

1 1/2" BSP threaded inlets and outlets for easy dry mounting.

Built-in thermal overload protection with auto-restart gives safety if motor overheats.

All internal electrical connections are sealed in resin for safety.

Impellor housing can be dismantled for cleaning if required.

High quality functional pump cage with large surface area.

Specially designed impellor allows the pumps to handle solids up to 8mm diameter.

Supplied with hose-fittings, 10m cable and impellor housing key.

The Perfect 13000 and 16000 models have an adjustable multi-function fitting for additional suction options such as a surface skimmer.
find out more